Description
REGULAR DUTY STEEL TENSIONER FOR FLAT SURFACE
The MIP-1300 is a regular duty steel banding tensioner. It can be used in 3/8" to 3/4" applications but we suggest using using it regular tension applictions only. This tool is for flat surface usage and requires the use of a sealer/crimper. This tool is used by wrapping your banding around the package, feeding both straps into your tensioner, tightening it down to the desired tension, placing and closing a seal onto the strap. It is a very cost effective way to enter the steel market.
Strapping Dimension:
W: 3/8" to 3/4" (10mm to 19mm)
G: .015" to .023" .38mm to .60mm)
Weight:
9 lbs
Tension:
Unlimited take-up, however tensioning too tightly will prematurely wear out parts.
Speed:
N/A
Average seal strength:
N/A
The MIP-1300 is a regular duty steel banding tensioner. It can be used in 3/8" to 3/4" applications but we suggest using using it regular tension applictions only. This tool is for flat surface usage and requires the use of a sealer/crimper. This tool is used by wrapping your banding around the package, feeding both straps into your tensioner, tightening it down to the desired tension, placing and closing a seal onto the strap. It is a very cost effective way to enter the steel market.
Strapping Dimension:
W: 3/8" to 3/4" (10mm to 19mm)
G: .015" to .023" .38mm to .60mm)
Weight:
9 lbs
Tension:
Unlimited take-up, however tensioning too tightly will prematurely wear out parts.
Speed:
N/A
Average seal strength:
N/A
Seal and Joint type:
Open/Snap-on
Sold elsewhere under: 5ZX71
Datasheets & Literature
Additional Information
Type: |
Tensioner |
Features: |
Complete Tool |
Operation: |
Manual |
For Use With: |
Steel |
Strap Size: |
1/2" |
Strap Size: |
5/8" |
Strap Size: |
3/4" |
