BXT2-19

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

TORX PH SCREW

Li-Ion 18v 4.0Ah replacement battery for the following tools: Orgapack  ORT400 ORT450 Signode  BXT2-19 BXT3-19 Part # 2187.004 Sold elsewhere under: 2187.004 H-2386-BATT 428905

1920.108.102 Signode Retaining Ring 8M

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

Li-Ion 14.4v and 18v replacement battery charger for the following tools: Orgapack ORT400 - ORT250 Orgapack ORT-130 ORT260 - ORT450 Signode BXT2-19 - BXT2-16 Signode BXT3-13 - BXT3-16 - BXT3-19 VT550L H45L H45A - H45B H46A - H46B -...

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

1832.041.022 Rear Inner Guide 16mm 428934

FRONT GUIDE 16MM

1832.042.048 Guide 16mm

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

SCREWED SHAFT

Replacement ball bearing for the Signode BXT2-16 and BXT2-19 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428883

Bolt for Signode BXT2

Replacement feedwheel for the Signode BXT2-19 Part is stamped with # 1821.047.023 This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. PLEASE NOTES: Battery must be removed from bander prior...

1832.022.055 Set Screw for Orgapack OR-T 200

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

BOLT

1832.041.021 Guide 19mm

Replacement Blocking Pawl for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428781

Replacement Intermediate Cable for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428858

LOWER LINKAGE

1920.103.062 Orgapack Retaining Ring

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

UPPER LINKAGE

1910.408.064 Set Screw M8 x 6

Replacement toothplate for the Signode BXT2-19       NOTES- Battery must be removed from bander prior to service. This is a common wear part, often replaced alongside the feedwheel Install removable thread locker (blue) on screws upon...

BOLT FOR ORGAPACK AND SIGNODE BATTERY STRAPPING TOOLS

CIRCUIT BOARD 1821.152.082

GEAR COVER 428851

COMPRESSION SPRING

BALL

GUIDE 16MM

1832.039.210 Set Screw

Replacement Signal Cable for the SIgnode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode # 428859

1832.039.203 Carrier Complete 2nd Step

CONTACT PLATE 18V

SPACER RING

Replacement Cable tensioning for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428804

428879 Housing Set Black **