For POLY tools

Replacement MIP 370 / MIP 380 Release lever spring. This is a key wear part for the MIP 370/380. Part # M380-6 or M370-6 All MIP parts are genuine OEM.

5 Pieces per tool, sold individually

REPLACEMENT 14.4v BATTERY FOR FROMM TOOLS For Models:P321P322P323P324P325Voltage:14.4 VoltsAmpere Hours (Ah or Amp Hours):2.8Chemistry:Nickel-Cadmium (Ni-Cad)Time to charge:1 hours / 60 minutesCharger:5327130OEM Replacement:N5-4316   Every battery...

REPLACEMENT 14.4v BATTERY FOR FROMM TOOLS For Models: P321 P322 P323 P324 P325 Voltage:14.4 Volts Ampere Hours (Ah or Amp Hours):3.0 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1 hours / 60 minutes Charger:5327130 Alternative...

Replacement touch contact switch for Fromm P328 and P329. This part can only be replaced by the same tool model type.  Automatic/Automatic  Manual/Manual  Auto/Manual This part is genuine OEM.

REPLACEMENT 18-VOLT EXTENDED 5.0ah BATTERY FOR FROMM TOOLS For Models: P318 P326 P327 P328 P329 Voltage:18 Volts Ampere Hours (Ah or Amp Hours):5.0 Chemistry:Lithium-Ion (Li-ion) Time to charge:1.5 hours / 90 minutes Charger:N5-4447-A OEM...

REPLACEMENT OEM 18v BATTERY FOR FROMM TOOLS For Models: P318 P326 P327 P328 P329 Voltage:18 Volts Ampere Hours (Ah or Amp Hours):5.0 Chemistry:Lithium-Ion (Li-oon) Time to charge:1.5 hours / 90 minutes Charger:N5-4447-A TTR Replacement:N5-4349-A This...

Replacement MIP 370 / MIP 380 Body pawl spring.Part # M380-16B or M370-16BAll MIP parts are genuine OEM.

REPLACEMENT 12v - 14.4v BATTERY CHARGER FOR FROMM TOOLS For Models:P320P321P322P323P324P325 Voltage:12 - 14.4 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad)Nickel-Metal Hydride (NiMH) Time to charge:1 hours / 60 minutes Every...

Replacement wheel for the Orgaoack ORT400 battery bander. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band. Easy...

Replacement End Cover for Fromm P328 & P329We only stock part # P32.0222, as this is the P32.8159 End Cover, with all the fixin's. 

Replacement MIP 370 / MIP 380 Cutter Actuating Pin. This is a key wear part for the MIP 370/380.Part # M380-1C or M370-1CAll MIP parts are genuine OEM.

Replacement Toothplate/Gripper Screw for the Orgapack ORT250 and ORT400 battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New...

Replacement Fromm P32.2078 motor.This is the motor for the P326 and P327 model tools.Please Note: All electronic items are non returnable. 

Replacement MIP 370 / MIP 380 Spring.Part # M380-11B or M370-11BAll MIP parts are genuine OEM.

Replacement wheel for the Orgapack ORT250 battery bander.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band...

Replacement Toothplate/Gripper for the Orgapack ORT250 battery bander. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn will allow the lower piece of...

REPLACEMENT 18v BATTERY CHARGER FOR FROMM TOOLS For Models: P318 P326 P327 P328 P329 Voltage:18 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Lithium-Ion (Li-Ion) Time to charge:1.5 hours / 90 minutes Every battery that is purchased from us is...

Replacement cylinder screw for the Orgapack ORT250 and ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Each tool has 11 of these, but...

Replacement Cable welding for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.017

1821.048.027 Gripper For Signode BXT3-16 Battery Powered Hand Tool

REPLACEMENT OEM 12v BATTERY FOR FROMM TOOLS For Models: P320 Voltage:12 Volts Ampere Hours (Ah or Amp Hours):3.0 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1 hours / 60 minutes Charger:5327130 Alternative Replacement:5327146-A Every battery that...

FEEDWHEEL

Replacement MIP 370 / MIP 380 Roll pin. Part # M380-15 or M370-15 All MIP parts are genuine OEM.

REPLACEMENT 12v BATTERY CHARGER FOR ORGAPACK & SIGNODE TOOLS For Models: ORT50 ORT83 ORT85 ORT86 BHC BHC2000 Voltage:12 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Please note...

Replacement contact plate complete for the Orgapack ORT200 & ORT300 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.152...

Replacement knife/cutter for the Orgapack ORT300 & ORT400 battery bander.Replacement knife/cutter for the Signode BXT-H battery bander.Replacement knife/cutter for the Cyklop CHT300 battery bander.   This is a common wear part...

Replacement feedwheel for the Signode BXT2-16   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed.      NOTES- Battery must be removed from bander prior to service. ...

Replacement reset cam for the Orgapack ORT250 and ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.022.185

Replacement Feedwheel 190107/D002330 For Polychem B400 Battery Tool Plastic Strapping Tool.

Replacement MIP 370 / MIP 380 Spring. This is a key wear part for the MIP 370/380. Part # M380-2G or M370-2G All MIP parts are genuine OEM.

Replacement MIP 370 / MIP 380 Set screw.Part # M380-16C or M370-16CAll MIP parts are genuine OEM.

REPLACEMENT OEM 12v BATTERY FOR ORGAPACK/SIGNODE TOOLS For Models: ORT100 ORT200 BXT Voltage:12 Volts Ampere Hours (Ah or Amp Hours):2.4 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Charger:2179.251 TTR...

Replacement Weld Lever for Models # P320 & P321 This part is genuine OEM.

Replacement Toothplate/Gripper for the Orgapack ORT400 battery bander.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn will allow...

FEEDWHEEL

Replacement Toothplate/Gripper for the Orgapack ORT130 and ORT260 battery bander.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn...

Replacement wheel for the Orgapack ORT130 and ORT260 battery banders.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning...

Replacement Spring for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010.092

MUL-320 PART#320-19  Gripper Pad. This bander part is OEM