Spinner Type Wing Seal Tensioner for use with round or irregular surfaces.The C001 is made to be used with stainless steel. This tool is perfect for hanging sign posts and lights. Strap Gauge Range .015 to .030 Strap Width Range  3/8" to 3/4"

Replacement Pawl Wheel for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.039.213

Replacement Pawl Shaft for the Orgapack ORT250 & ORT400 battery bander. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.039.214      

Replacement Blocking Pawl for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.031.057

Protection Cover for motor cover complete for the  Orgapack ORT250/400 battery bander.  This part is suggested to have on any tool where the tool could be in an environment where it could be damaged. NOTES- Battery must be removed from bander...

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement Housing Set for the Orgapack ORT250 & ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.011.198

Replacement Housing set for Fromm P326. If you don't see  your model # please just Email us.This part is geniune OEM

Replacement Left Housing for Fromm P326 & P327. If you don't see your model # please just Email us.This part is geniune OEMAlso available as a set.

Replacement Right Housing for Fromm P326 & P327. If you don't see your model # please just Email us.This part is geniune OEMAlso available as a set.

Replacement Housing set for Fromm P327.  If you don't see  your model # please just Email us. This part is geniune OEM

MUL-330 PART#330-05  Anvil.   There are 3 of these in each tool.     This bander part is OEM

MUL-330 PART#330-02  Side Plate. There are 2 of these in each tool.   This bander part is OEM

MUL-330 PART#330-21  Retaining Ring.   There are 2 of these in each tool.     This bander part is OEM

MUL-330 PART#330-20  Clipring.   There are 4 of these in each tool.     This bander part is OEM

MUL-330 PART#330-07  Slide Plate.   There are 2 of these in each tool.     This bander part is OEM

MUL-330 PART#330-04  Inner Jaw.   There are 6 of these in each tool.     This bander part is OEM

MUL-330 PART#330-03  Outer Jaw.   There are 4 of these in each tool.     This bander part is OEM

MUL-330 PART#330-01  Handle.   There are 2 of these in each tool.     This bander part is OEM

MUL-320 PART#320-52  Retaining Ring.    each tool has 2, sold individually.     This bander part is OEM 

MUL-320 PART#320-49  Tension Pawl.   This bander part is OEM 

MUL-320 PART#320-38  Gripper Foot.  This bander part is OEM

MUL-320 PART#320-35  Gripper Foot Spring. This bander part is OEM

MUL-320 PART#320-31  Gripper Spring. This bander part is OEM

MUL-320 PART#320-24  Cutter. This bander part is OEM

MUL-320 PART#320-19  Gripper Pad. This bander part is OEM

MUL-320 PART#320-11 Arm Spring. This bander part is OEM

MUL-320 PART#320-05  Tension Pawl.   This bander part is OEM

MUL-320 PART#320-01  Ratchet Wheel.         This bander part is OEM 

MUL-20 PART#20-18 Die HolderThis bander part is OEM

MUL-16 PART#16-26  Feedwheel/Tension wheel. This part pulls the banding tight and works with the gripper  to achieve tension on the banding. It is common for this part to wear out causing it to slip when tensioning the band. If the...

MUL-16 PART#16-22  Cutter blade   This part cuts the banding  It is common for this part to wear out causing it to to properly cut the banding. This is a common wear part     This bander part is OEM     

MUL-16 PART#16-21  Die Also known as the Punch, Steel banders punch a die cut to lock the banding.  This is considered a common wear part.The MUL-16 has a total of 3 dies per tool. These dies are reversible for double the life...

MUL-16 PART#16-17 Die HolderThis bander part is OEM

MUL-16 PART#16-7  Strap LifterThis bander part is OEM

MUL16 PART#16-1  Tension Handle           This bander part is OEM     

MUL-16 PART#16-25  Clutch Plug / Bottom Gripper Also known as the bottom gripper, This part holds the bottom strap from moving while the feedwheel tensions the strap. This is considered a common wear part.This bander part is OEM

MUL16 PART#16-2  Sealing Handle           This bander part is OEM     

Replacement bearing for Fromm toolsIf you don't see  your model # please just Email us.This part is genuine OEM.

MIP-4900 PART #M4900-22  Clutch Plug  Also known as the bottom gripper, This part holds the bottom strap from moving while the feedwheel tensions the strap. This is considered a common wear part. This bander part is OEM