Fromm A385 Pneumatic Combination Tool For Steel Strapping

PNEUMATIC COMBINATION TOOL FOR STEEL STRAPPING

The Fromm A385 is a pneumatic powered banding tool that uses a "lasso" type loop to strap bundles and packages down. This tool does not require the use of a seal nor the use of any other tools. The tool uses a feedwheel to pull the banding tight and then uses its built in punch and die system. The Fromm A385 is an easy to use combination tool for 3/8" to 3/4" applications. 

Strapping Dimension: 
W: 3/8" to 3/4" (10mm to 19mm)
G: .015" to .025" (.38mm to .63mm)

Weight: 
22 lbs (10 kg) without suspension bracket
23.2 lbs (10.5 kg) with suspension bracket

Tension:
M1 : Up to 610 lbs (2700 N)
M2 : Up to 740 lbs (3500 N)
M3 : Up to 1,060 lbs (4700 N)
M4: Up to 1,570 lbs (7000 N)

Speed:
M1 : Up to 7.5 in/s (190 mm/s)
M2 : Up to 4.7 in/s (120 mm/s)
M3 : Up to 4.0 in/s (100 mm/s)
M4: Up to 2.5 in/s (65 mm/s)

Average seal strength:
Up to 80% depending on the quality of strapping
 

Seal and Joint type:
No seal is required
Microlock™ joint