MIP

M420-6A Jaw Pivot Pin Nut For MIP-420 Heavy Duty Offset Poly Strap Sealer.

M420-7 Handle Pin For MIP-420 Heavy Duty Offset Poly Strap Sealer.

M420-8 Side Plate

M430-2 Jaw 3/4

M430-5 Link Pin 34

MIP4900 PART#M4900-1  Ratchet Wheel           This bander part is OEM     

MIP-4900 PART #M4900-18 Die Holder         This bander part is OEM     

MIP4900 PART#M4900-19 Die   Also known as the Punch, Steel banders punch a die cut to lock the banding.  This is considered a common wear part.The MIP-4900 has a total of 3 dies per tool...

MIP PART#M4900-2 Handle Pawl      This bander part is OEM     

MIP-4900 PART #M4900-22  Clutch Plug  Also known as the bottom gripper, This part holds the bottom strap from moving while the feedwheel tensions the strap. This is considered a common...

MIP-4900 PART#M4900-25  Large Bearing           This bander part is OEM     

MIP PART#M4900-3 Pawl Spring  Sold Individually but 3 are needed per tool   This bander part is OEM     

MIP 4900 PART#M4900-33 Small Bearing       This bander part is OEM     

MIP4900 PART#M4900-38  Feedwheel/Tension wheel.   This part pulls the banding tight and works with the gripper  to achieve tension on the banding. It is common for this part to...

MIP4900 PART #M4900-4  Tension HandleThis bander part is OEM

MIP-4900 PART #M4900-41  Cutter Blade This part cuts the banding  It is common for this part to wear out causing it to to properly cut the banding. This is a common wear part This...

MIP-4900 PART#M4900-44 Die Holder BearingThis bander part is OEM

MIP4900 PART#M4900-5  Knob           This bander part is OEM THIS PART VARIES IN COLOR    

MIP PART#M4900-6 E-Ring     This bander part is OEM     

MIP 4900 PART#M4900-66  Sealing HandleThis bander part is OEM  Please note: Some of the operating instructions call this part a Tension Handle. This part is not. This is the sealing...

BRAKE PAD

BRAKE PAD

SPIN NUT

STRAP GUIDE

SPRING

STRAP CLIP WASHER

10" wheel for 5/8 shaft

PALLNUT

Brake Arm Assembly Old Part # M5200-013 Other Part# H-39B-018

CLIP

SPRING

This is a regular duty Double Notch steel strapping sealer that is used for strap gauge ranges .015-.023. The MIP1100 sealer is used with RD open seals and is ideal for flat surfaces. Available...

This is a regular duty Single Notch steel strapping sealer that is used for 3/4" steel banding, strap gauge ranges .023-.025. The MIP1120 sealer is used with RD pusher seals and is ideal for round...

This is a heavy duty Double Notch steel strapping sealer that is used for 3/4" steel banding, strap gauge ranges .023-.025. The MIP1152 sealer is used with RD open seals and is ideal for flat...

REGULAR DUTY STEEL TENSIONER FOR FLAT SURFACEThe MIP-1300 is a regular duty steel banding tensioner. It can be used in 3/8" to 3/4" applications but we suggest using using it regular tension...

HEAVY DUTY STEEL TENSIONER FOR FLAT SURFACEThe MIP-1400 is a heavy duty steel banding tensioner. It can be used in 3/4" to 1 1/4" applications. This tool is for flat surface usage and requires the...

The MIP1620 is a feedwheel type tensioner that is designed for round surface applications. It uses a feedwheel to tighten up the steel banding. Will accommodate steel strapping ranges...

Includes M1800-20 Set Screw M1800-22 Cotter Pin M1800-18 Screw M1800-19 Lock Washer Hex Key

REGULAR DUTY PUSHER BAR TENSIONER The MIP-1800 is a regular duty, pusher bar tensioner for round or irregular surfaces. With an extremely small footprint, this tool is perfect for jobs where there...

This is a heavy duty Single Notch steel strapping sealer that is used for strap gauge ranges .025-.031.     The MIP3000 sealer is used with HD open or closed seals.The...