MUL20

MUL20 PART#20-22HT  Clutch Plug / Bottom Gripper Also known as the bottom gripper, This part holds the bottom strap from moving while the feedwheel tensions the strap. This is considered a common wear part. This bander part is OEM

MUL-20 PART#20-38HT Feedwheel/Tension wheel.This part pulls the banding tight and works with the gripper  to achieve tension on the banding. It is common for this part to wear out causing it to slip when tensioning the band. If the wheel just...

MUL-20 PART#20-41 Cutter Blade This part cuts the banding  It is common for this part to wear out causing it to to properly cut the banding. This is a common wear partThis bander part is OEM

MUL-20 PART#20-44 Die Holder Bearing Sold Individually but 2 are needed per tool This bander part is OEM

MUL20 PART#20-19  Die Also known as the Punch, Steel banders punch a die cut to lock the banding.  This is considered a common wear part. The MUL-20 has a total of 3 dies per tool. These dies are reversible for double the life. This...

MUL20 PART#20-5  Knob     Sold Individually but 2 are needed per tool    This bander part is OEM     

MUL20 PART# 20-50 or 20-60 20-60 - 1/2" - 5/8"20-50 - 5/8" - 3/4" This bander part is OEM

MUL-20 PART#20-61 Washer This bander part is OEM

MUL-20 PART#20-34 Washer This bander part is OEM

MUL-20 PART#20-33 Small BearingThis bander part is OEM

MUL-20 PART#20-35 Heavy Duty Retaining Ring

MUL-20 PART#20-25  Large Bearing This bander part is OEM

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

MUL-20 PART#20-51 Pin This bander part is OEM

MUL20 PART#20-7 HD Retaining Ring     This bander part is OEM     

MUL-20 PART#20-53 Screw Sold Individually but 2 are needed per tool This bander part is OEM

MUL20 PART#20-1  Ratchet Wheel Sold Individually but 2 are needed per tool  This bander part is OEM

MUL20 PART#20-15 ScrewSold Individually but 6 are needed per tool     This bander part is OEM     

MUL20 PART#20-14 Screw Sold Individually but 4 are needed per tool  This bander part is OEM

MUL-20 PART#20-54 Guide Arm This bander part is OEM

MUL-20 PART#20-40 Screw   Sold Individually but 2 are needed per tool   This bander part is OEM     

MUL-20 PART#20-49 Pin This bander part is OEM

MUL-20 PART#20-42 Cam Follower This bander part is OEM

MUL20 PART#20-10 Washer This bander part is OEM

MUL-20 PART#20-39 Screw Sold Individually but 4 are needed per tool  This bander part is OEM

MUL-20 PART#20-52 Cover This bander part is OEM

MUL20 PART#20-3 Pawl SpringSold Individually but 3 are needed per tool This bander part is OEM

MUL-20 parts kit with the most commonly replaced parts included in it. These are the parts, and quantities, you should replace when your tool starts to break down.Comes with the following: Part Part# QTY Feedwheel      20-38HT 1 ...

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

MUL-20 PART#20-43 Bushing Sold Individually but 2 are needed per tool This bander part is OEM

MUL-20 PART#20-18 Die HolderThis bander part is OEM

MUL20 PART#20-66  Sealing HandleThis bander part is OEM

MUL20 PART# 20-47 or 20-62 20-62 - 1/2" - 5/8"20-47 - 5/8" - 3/4" This bander part is OEM

MUL20 PART#20-2 Tension Pawl This bander part is OEM

MUL20 PART#20-20 Dowel PinSold Individually but 3 are needed per tool This bander part is OEM

MUL20 PART#20-8 PinThis bander part is OEM

MUL20 PART# 20-23 or 20-64 20-64 - 1/2" - 5/8" 20-23 - 5/8" - 3/4" This bander part is OEM

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

MUL-20 PART#20-32 Adjustment Screw This bander part is OEM

MUL-20 PART#20-26  Feedwheel Support SpringThis bander part is OEM