ORT130

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement LCD Operating Unit for the Orgapack and Signode series of battery powered banders.   This is the panel that controls every function of the tool. Please be sure to take and transfer your protection cover 1832.011.399 when replacing this...

Replacement wheel for the Orgapack ORT130 and ORT260 battery banders. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the...

Replacement Toothplate/Gripper for the Orgapack ORT130 and ORT260 battery bander.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn...

TORX PH SCREW

1821.151.052 Cable Harness Housing

1821.151.054 Cable Harness Welding Unit

1832.011.328 Tension Button

1832.011.329 Actuator

Replacement knife/cutter for the Orgapack ORT130 and ORT260 battery bander.   This is a common wear part that, when worn, will not cut the banding completely off. Easy replacement.   NOTES- Battery must be removed from bander prior to...

1832.011.346 Side Cover aka FW Cover   Does not work with ORT450 / BXT3-19

1821.010.143 Replacement Spring

SPRING

1821.010.144 Replacement Spring

2189.011 Protection Cover for LCD touchscreen

1920.108.102 Signode Retaining Ring 8M

Replacement rocker lever complete for the Orgapack ORT130/260/450 and Signode BXT3-13/16/19 battery banders. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.031...

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

1821.151.050 Cable Harness Rocker Lever

1832.041.019 Guide 13mm 1/2

1821.035.011 Bolt

CYLINDER HEAD TORX SCREW M4 x

BOLT

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

1832.022.055 Set Screw for Orgapack OR-T 200

1914.840.162 Screw PH PT TORX 40x16

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

1832.042.043 Guide 13mm

1910.408.064 Set Screw M8 x 6

COMPRESSION SPRING

1832.039.203 Carrier Complete 2nd Step

1832.011.322 Weld Button

1832.022.254 Spring Assembly for Orgapack and Signode battery operated strapping tools

1832.022.259 Belt Cover

1832.031.108 Reset lever complete for Orgapack and Signode battery operated strapping tools

For OR-T 130, OR-T 250, OR-T 260, OR-T 400, OR-T 450

1911.304.084 Screw M4 x 8

BEARING *

REPLACEMENT ORGAPACK CAM DISC FOR ORT130/260

1832.011.300 Housing