ORT200

Replacement knife/cutter for the Orgapack ORT 200 & ORT250 battery bander. Replacement knife/cutter for the Signode BXT battery bander. This is a common wear part that, when worn, will not cut the banding completely off . Easy replacement...

Replacement compression spring for the Orgapack ORT200, ORT300, ORT250, and ORT400 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation...

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

Replacement flanged bushing for the Orgapack battery banders.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.022.049 Signode...

REPLACEMENT OEM 12v BATTERY FOR ORGAPACK/SIGNODE TOOLS For Models: ORT100 ORT200 BXT Voltage:12 Volts Ampere Hours (Ah or Amp Hours):2.4 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Charger:2179.251 TTR...

Replacement contact plate complete for the Orgapack ORT200 & ORT300 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.152...

1920.108.102 Signode Retaining Ring 8M

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

REPLACEMENT 12v - 14.4v BATTERY CHARGER FOR ORGAPACK/SIGNODE/CYKLOP TOOLS For Models: ORT100 ORT200 ORT300 BXT BXT19 CMT200 CHT300 Voltage:12 - 14.4 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad)Nickel-Metal Hydride...

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

1832.022.055 Set Screw for Orgapack OR-T 200

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

COMPRESSION SPRING

Replacement Toothplate for the Signode BXT and the Orgapack ORT200   This is a common wear part that when worn, will cause the lower band to pull through the bander when tensioning the strap. Easy replacement only requires a #2...

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

Replacement wheel for the Signode BXT and the Orgapack ORT200 This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band...

SWITCH

SPRING

1930.110.092 Ball Bearing

Replacement Black Brush cover kit for the Orgapack ORT200/300 battery banders. NOTES-Battery must be removed from bander prior to service.Please confirm which color your tool currently has!!!Orgapack part# 1821.140.051 THIS PART IS NON-RETURNABLE!...

Replacement Rocker for the Orgapack ORT200 / Signode BXT   This part is used but is confirmed in working order.       NOTES- Battery must be removed from bander prior to service.

1832.022.059 Safety Plate

HOUSING SET

SWING ARM COMPLETE

COVER SEALING

1832.042.015 Guide

BALL GUIDE

1832.042.021 Guide 13mm

CONNECTING ROD **

1832.022.062 Pinnion

2179.880 Protection Cover

1926.501.060 Bearing **use N3-4520

WELD LEVER

SWITCH

BELT

STRAP STOP GUIDE 13MM **

SPRING

SHAFT **

1933.710.150 Needle Bushing

1832.042.018 Bolt