ORT250

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement planetary wheel, 2nd step for the Orgapack ORT250 and ORT400 battery bander. This part is sold individually, each tool contains 6. NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on...

Replacement Toothplate/Gripper for the Orgapack ORT250 battery bander. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn will allow the lower piece of...

Replacement Spring for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010.092

TORX PH SCREW

Replacement wheel for the Orgapack ORT250 battery bander.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band...

Replacement compression spring for the Orgapack ORT200, ORT300, ORT250, and ORT400 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation...

Replacement knife/cutter for the Orgapack ORT 200 & ORT250 battery bander. Replacement knife/cutter for the Signode BXT battery bander. This is a common wear part that, when worn, will not cut the banding completely off . Easy replacement...

Replacement cylinder screw for the Orgapack ORT250 and ORT400 battery bander.    **Sold individually** NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Each tool...

Replacement ball bearing for the Orgapack ORT250 and ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1930.180...

Replacement reset cam for the Orgapack ORT250 and ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.022.185

Replacement cutter screw for the Orgapack ORT250 and ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1912.404.104...

Replacement toothed belt for the Orgapack ORT250/260 and ORT400/450 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821...

Replacement Compression Spring for the Orgapack ORT250 & ORT400 battery bander. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010.095

Replacement flanged bushing for the Orgapack battery banders.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.022.049 Signode...

Li-Ion 14.4v OEM battery for the following tools: Orgapack  ORT250 Signode  BXT2 VT550L Part # 2187.002 Sold elsewhere under: 2187.002 H-2385-BATT 428866

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

Replacement Cable tensioning for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.016

1920.108.102 Signode Retaining Ring 8M

Replacement Cable welding for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.017

Li-Ion 14.4v and 18v replacement battery charger for the following tools: Orgapack ORT400 - ORT250 Orgapack ORT-130 ORT260 - ORT450 Signode BXT2-19 - BXT2-16 Signode BXT3-13 - BXT3-16 - BXT3-19 VT550L H45L H45A - H45B H46A - H46B -...

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

Replacement Pawl Shaft for the Orgapack ORT250 & ORT400 battery bander. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.039.214      

Replacement PT-Screw for the Orgapack ORT250 & ORT400 battery bander.Sold individually, each tool contains 9   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation ...

1832.041.019 Guide 13mm 1/2

Replacement planetary wheel for the Orgapack ORT250 and ORT400 battery bander. This part is sold individually, each tool contains 3. NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws...

Replacement Intermediate Cable for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.015

1832.022.055 Set Screw for Orgapack OR-T 200

SCREWED SHAFT

Replacement Blocking Pawl for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.031.057

Replacement compression spring for the Orgapack ORT250 and ORT400 battery bander. NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010...

BOLT

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

Bolt for Signode BXT2

Replacement pc board for the Orgapack ORT250 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.152.072 ALL ELECTRONIC...

Replacement Signal Cable for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.018

1920.103.062 Orgapack Retaining Ring

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

1832.042.043 Guide 13mm

1910.408.064 Set Screw M8 x 6