ORT300

Replacement compression spring for the Orgapack ORT200, ORT300, ORT250, and ORT400 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation...

Replacement knife/cutter for the Orgapack ORT300 & ORT400 battery bander.Replacement knife/cutter for the Signode BXT-H battery bander.Replacement knife/cutter for the Cyklop CHT300 battery bander.   This is a common wear part...

1920.108.102 Signode Retaining Ring 8M

Replacement flanged bushing for the Orgapack battery banders.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.022.049 Signode...

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

Replacement contact plate complete for the Orgapack ORT200 & ORT300 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.152...

REPLACEMENT 12v - 14.4v BATTERY CHARGER FOR ORGAPACK/SIGNODE/CYKLOP TOOLS For Models: ORT100 ORT200 ORT300 BXT BXT19 CMT200 CHT300 Voltage:12 - 14.4 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad)Nickel-Metal Hydride...

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

REPLACEMENT 14.4v BATTERY FOR ORGAPACK/SIGNODE/CYKLOP TOOLS For Models: ORT300 BXT19 CMT200 CHT300 Voltage:14.4 Volts Ampere Hours (Ah or Amp Hours):1.9 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Charger: Every battery that...

1832.022.055 Set Screw for Orgapack OR-T 200

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

COMPRESSION SPRING

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

SWITCH

SPRING

1930.110.092 Ball Bearing

Replacement Black Brush cover kit for the Orgapack ORT200/300 battery banders. NOTES-Battery must be removed from bander prior to service.Please confirm which color your tool currently has!!!Orgapack part# 1821.140.051 THIS PART IS NON-RETURNABLE!...

Replacement wheel for the Signode BXT-H, Cyklop CHT-300 and the Orgapack ORT-300   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not...

HOUSING SET

COVER SEALING

TOP TOOTH PLATE 426454

BALL GUIDE

1832.042.028 Strap Stop 16/19

1832.022.062 Pinnion

2179.880 Protection Cover

1926.501.060 Bearing **use N3-4520

WELD LEVER

SWITCH

BELT

STRAP STOP FRONT 16mm

SPRING

1933.710.150 Needle Bushing

1832.042.018 Bolt

1821.090.021 Orgapack Label

SPRING

TOUCH BUTTON

SPRING

1917.401.125 Spacer Disk

1917.803.031 Washer