ORT450

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement LCD Operating Unit for the Orgapack and Signode series of battery powered banders.   This is the panel that controls every function of the tool. Please be sure to take and transfer your protection cover 1832.011.399 when replacing this...

TORX PH SCREW

Replacement wheel for the Orgapack ORT450 battery banders.   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band...

1821.151.052 Cable Harness Housing

1821.048.029 Replacement Toothplate/Gripper for the Orgapack ORT450 battery bander. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The Toothplate/Gripper when worn will allow the...

2189.011 Protection Cover for LCD touchscreen

1832.011.328 Tension Button

Replacement rocker lever complete for the Orgapack ORT130/260/450 and Signode BXT3-13/16/19 battery banders. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.031...

1821.151.054 Cable Harness Welding Unit

1920.108.102 Signode Retaining Ring 8M

1832.011.329 Actuator

Replacement toothed belt for the Orgapack ORT250/260 and ORT400/450 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821...

Replacement knife/cutter for the Orgapack ORT450 battery bander.   This is a common wear part that, when worn, will not cut the banding completley off . Easy replacement.   NOTES- Battery must be removed from bander prior to service...

1821.035.011 Bolt

1821.010.143 Replacement Spring

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

SPRING

1832.041.022 Rear Inner Guide 16mm 428934

1821.010.144 Replacement Spring

CYLINDER HEAD TORX SCREW M4 x

1821.151.050 Cable Harness Rocker Lever

1832.042.048 Guide 16mm

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

Replacement Motor for Orgapack ORT260/450 and Signode BXT3-16/19

REPLACEMENT ORGAPACK CAM DISC FOR ORT450

1832.031.108 Reset lever complete for Orgapack and Signode battery operated strapping tools

1832.022.055 Set Screw for Orgapack OR-T 200

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

BOLT

1832.041.021 Guide 19mm

2189.012 Suspension Bow with Hardware

1914.840.162 Screw PH PT TORX 40x16

1832.031.108 Blocking Pawl for Orgapack and Signode battery operated strapping tools

1910.408.064 Set Screw M8 x 6

COMPRESSION SPRING

1832.022.259 Belt Cover

GUIDE 16MM

1832.039.203 Carrier Complete 2nd Step

1832.011.322 Weld Button