ORT50

REPLACEMENT 12v BATTERY CHARGER FOR ORGAPACK & SIGNODE TOOLS For Models: ORT50 ORT83 ORT85 ORT86 BHC BHC2000 Voltage:12 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Please note...

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

1935.508.120 Slide Bearing

1920.103.062 Orgapack Retaining Ring

Replacement pc board for the Orgapack ORT50 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.152.007 ALL ELECTRONIC...

1832.011.079 Insert Long

1832.011.078 Insert Short

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

Replacement tension plate for the Orgapack ORT50 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.048.004

Replacement welding lever for the Orgapack ORT50 battery bander.      NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.084.002

Replacement tension spring for the Orgapack ORT50 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.011.003

Replacement wheel for the Orgapack ORT50 battery bander. This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. The feedwheel will mill on the strap not allowing tensioning of the band...

1832.031.011 Guide

1832.039.009 Pawl

1832.041.002 F Strap Guide

1820.080.051 Knob

1933.706.090 Needle Bushing

1933.710.150 Needle Bushing

1933.906.090 Needle Bushing

1821.090.021 Orgapack Label

1820.030.418 Special Screw M4

1820.030.092 Set Screw

1922.104.123 Locating Pin 4.0 x 12

BENZING RETAINING CLIP, Lock washer

1821.019.001 Spring Bow

1921.304.240 Cylinder Pin 4 X 24

1911.804.127 Counter Sunk Screw M4x12

1821.031.014 Bolt

Replacement torsion spring for the Orgapack ORT50 battery bander. NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.012.008

Replacement tension spring for the Orgapack ORT50 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1820.010.182

Replacement coupling for the Orgapack ORT50 battery bander.       NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.250.003

Replacement motor for the Orgapack ORT50 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.140.002 ALL ELECTRONIC ITEMS...

Replacement housing set for the Orgapack ORT50 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.011.153