Signode

Replacement feedwheel for the Signode BXT2-16   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed.      NOTES- ...

Replacement toothplate for the Signode BXT2-16 NOTES- Battery must be removed from bander prior to service. This is a common wear part, often replaced alongside the feedwheel Install removable...

Replacement Pawl Wheel for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon...

Replacement Blocking Pawl for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws...

428812 Spacer Disk

428830 Swivel Bearing

428837 Supporting Disk

Replacement knife/cutter for the Signode BXT2-16   This is a common wear part that, when worn, will not cut the excess banding off of your package.     NOTES- Battery must be removed...

Replacement Intermediate Cable for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on...

428876 Strap Guide Set 9mm (3/8")

428879 Housing Set Black **

Replacement ball bearing for the Signode BXT2-16 and BXT2-19 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on...

Replacement cylinder screw for the Signode BXT2 and BXT2-19 battery bander.   **Sold Individually**    NOTES- Battery must be removed from bander prior to service. Install removable...

Replacement feedwheel for the Signode BXT2-19 Part is stamped with # 1821.047.023 This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed...

Replacement toothplate for the Signode BXT2-19       NOTES- Battery must be removed from bander prior to service. This is a common wear part, often replaced alongside the feedwheel ...

Replacement knife/cutter for the Signode BXT2-19   This is a common wear part that, when worn, will not cut the excess banding off of your package.     NOTES- Battery must be removed...

Replacement cam disc for the Signode BXT2-19 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon...

Optional Feedwheel guard for PRHR strapping tools. This part will help protect your feedwheel from outside wear and is heavily recommended by Traditional Tool Repair, Inc. technicians. 

429424 Weld Belt

434669 Roll Pin 6x20

1/2" Serrated Poly Seal Packed 1000/box

ROUND BELT 

800602 Breaker Nose Replaced 423513

manual seal fed double notch combination for steel strapping 5/8" steel Comes with tool manual at no extra cost to you! 30 day warranty Picture is of tool being listed. 

HEAVY DUTY SEALER FOR 2" STEELThe Signode B-250 is a heavy duty sealer for 2" steel strap only. This tool is a sealer only, requiring the use of a heavy duty tensioner as well. To properly use this...

BREAKER FOOT

TENSION PINION

TENSION WHEEL

Clutch Plug Assembly for Ybico S290

Feedwheel for Ybico S290 tensioner

Regular Duty Steel Strapping 1/2" x .020" 1,200 lb break strength approximately 3,087' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Regular Duty Steel Strapping 1/2" x .023" 1,380 lb break strength approximately 2,668' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Regular Duty Steel Strapping 5/8" x .020" 1,500 lb break strength approximately 2,468' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Regular Duty Steel Strapping 5/8" x .023" 1,725 lb break strength approximately 2,153' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Regular Duty Steel Strapping 3/4" x .020" 1,800 lb break strength approximately 2,058' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Regular Duty Steel Strapping 3/4" x .023" 2,050 lb break strength approximately 1,796' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Heavy Duty Steel Strapping / High Tensile Steel Strapping 3/4" x .025" 2,700 lb break strength approximately 1,648' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Heavy Duty Steel Strapping / High Tensile Steel Strapping 3/4" x .031" 3,500 lb break strength approximately 1,334' 105 lbs per roll 12 rolls per skid Black Painted & Waxed

Heavy Duty Steel Strapping / High Tensile Steel Strapping 1 ¼" x .031" 5,500 lb break strength approximately 836' 105 lbs per roll 20 rolls per skid Black Painted & Waxed

Heavy Duty Steel Strapping / High Tensile Steel Strapping 2" x .044" 12,300 lb break strength approximately 363' 125 lbs per roll 15 rolls per skid Black Painted & Waxed