Description
HEAVY DUTY STEEL TENSIONER FOR FLAT SURFACE
The Teknika MUL-420 is a heavy duty steel banding tensioner. It can be used in 3/4" to 1 1/4" applications. This tool is for flat surface usage and requires the use of a sealer/crimper. The MUL-430 is the complimentary sealing tool. This tool is used by wrapping your banding around the package, feeding both straps into your tensioner, tightening it down to the desired tension, placing and closing a seal onto the strap. This is one of the top performing tensioners for heavy duty steel banding applications.
Strapping Dimension:
W: 3/4" to 1 1/4" (19mm to 32mm)
G: up to .044" (up to 1.1mm)
Weight:
7 lbs
Tension:
Unlimited take-up, however tensioning too tightly will prematurely wear out parts.
Speed:
N/A
Average seal strength:
N/A
The Teknika MUL-420 is a heavy duty steel banding tensioner. It can be used in 3/4" to 1 1/4" applications. This tool is for flat surface usage and requires the use of a sealer/crimper. The MUL-430 is the complimentary sealing tool. This tool is used by wrapping your banding around the package, feeding both straps into your tensioner, tightening it down to the desired tension, placing and closing a seal onto the strap. This is one of the top performing tensioners for heavy duty steel banding applications.
Strapping Dimension:
W: 3/4" to 1 1/4" (19mm to 32mm)
G: up to .044" (up to 1.1mm)
Weight:
7 lbs
Tension:
Unlimited take-up, however tensioning too tightly will prematurely wear out parts.
Speed:
N/A
Average seal strength:
N/A
Seal and Joint type:
Open/Snap-on
Uses matching wear parts to the MUL-20 sealless strapping tool.
This is a comparable tool to the TH-G, Signode TH34, and Fromm A301
Manual
Additional Information
Type: |
Tensioner |
Features: |
Complete Tool |
Operation: |
Manual |
For Use With: |
Steel |
