BXT2-16

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement feedwheel for the Signode BXT2-16   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed.      NOTES- Battery must be removed from bander prior to service. ...

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

Replacement toothplate for the Signode BXT2-16 NOTES- Battery must be removed from bander prior to service. This is a common wear part, often replaced alongside the feedwheel Install removable thread locker (blue) on screws upon installation

Li-Ion 14.4v OEM battery for the following tools: Orgapack  ORT250 Signode  BXT2 VT550L Part # 2187.002 Sold elsewhere under: 2187.002 H-2385-BATT 428866

Replacement knife/cutter for the Signode BXT2-16   This is a common wear part that, when worn, will not cut the excess banding off of your package.     NOTES- Battery must be removed from bander prior to service. Install removable thread...

1920.108.102 Signode Retaining Ring 8M

Li-Ion 14.4v and 18v replacement battery charger for the following tools: Orgapack ORT400 - ORT250 Signode BXT2-19 - BXT2-16 VT550L Sold elsewhere under: 2188.002 428868

1832.041.019 Guide 13mm 1/2

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.

Replacement Intermediate Cable for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428858

BOLT FOR ORGAPACK AND SIGNODE BATTERY STRAPPING TOOLS

Bolt for Signode BXT2

BALL

SCREWED SHAFT

1832.039.210 Set Screw

1920.103.062 Orgapack Retaining Ring

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

Replacement Signal Cable for the SIgnode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode # 428859

BOLT

SPACER RING

High quality heavy duty stainless steel wire cleaning brush, Phillips head screwdriver , and ORT/BXT Gripper removal tool. This kit includes everything you need to keep your Signode or Orgapack bander clean and well maintain. Can be used to...

Replacement ball bearing for the Signode BXT2-16 and BXT2-19 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428883

428879 Housing Set Black **

1832.042.044 Strap Lever Guide

Replacement Blocking Pawl for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428781

Replacement Cable tensioning for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428804

Heavy duty wire cleaning brush and Phillips head screwdriver kitCan be used to clean: Feedwheel Grippers Clutch plug Metal housings

GEAR COVER 428851

COMPRESSION SPRING

BEARING *

Replacement cylinder screw for the Signode BXT2 and BXT2-19 battery bander.   **Sold Individually**    NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Each...

COVER MOTOR SUPPORT

1832.039.203 Carrier Complete 2nd Step

GUIDE 13MM

1832.022.055 Set Screw for Orgapack OR-T 200

1832.042.043 Guide 13mm

PC BOARD COVER

SHOULDER SCREW

PROTECTION PLATE