MIP-4900 PART#M4900-44 Die Holder BearingThis bander part is OEM

MIP-4900 PART #M4900-18 Die Holder         This bander part is OEM     

MIP4900 PART#M4900-19 Die   Also known as the Punch, Steel banders punch a die cut to lock the banding.  This is considered a common wear part.The MIP-4900 has a total of 3 dies per tool. These dies are reversible for double the life...

MIP-4900 PART #M4900-41  Cutter Blade This part cuts the banding  It is common for this part to wear out causing it to to properly cut the banding. This is a common wear part This bander part is OEM

REPLACEMENT OEM 18v BATTERY FOR FROMM TOOLS For Models: P318 P326 P327 P328 P329 Voltage:18 Volts Ampere Hours (Ah or Amp Hours):5.0 Chemistry:Lithium-Ion (Li-oon) Time to charge:1.5 hours / 90 minutes Charger:N5-4447-A TTR Replacement:N5-4349-A This...

The MIP1620  Pawl Spring M1620-16 There are 2 of these in each tool. They are sold individually.

The MIP1620  Hold Pawl M1620-14 There are 2 of these in each tool. They are sold individually.

The MIP1620 Spring M1620-3

The MIP1620 Feedwheel shaft M1620-9

The MIP1620 Bushing M1620-8

The MIP1620  Tension Gear M1620-7

The MIP1620  Pinion Gear M1620-6

The MIP1620 Pawl Pin M1620-5

The MIP1620  Tension Handle M1620-4

The MIP1620  Drive Pawl M1620-2

MUL-331 is an advanced patented (PET )Polyester sealer for heavy duty applications. Excellent performance on Polyester (PET)  strapping with ORP 2100 or equivalent serrated seals. Staggered jaws allow the tool to be applied in either...

Replacement Intermediate Cable for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.015

Replacement Signal Cable for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.151.018

Replacement Spring for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010.092

Replacement Compression Spring for the Orgapack ORT250 & ORT400 battery bander. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1821.010.095

Spinner Type Wing Seal Tensioner for use with round or irregular surfaces.The C001 is made to be used with stainless steel. This tool is perfect for hanging sign posts and lights. Strap Gauge Range .015 to .030 Strap Width Range  3/8" to 3/4"

Replacement Pawl Wheel for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.039.213

Replacement Pawl Shaft for the Orgapack ORT250 & ORT400 battery bander. Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.039.214      

Replacement Blocking Pawl for the Orgapack ORT250 & ORT400 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.031.057

Protection Cover for motor cover complete for the  Orgapack ORT250/400 battery bander.  This part is suggested to have on any tool where the tool could be in an environment where it could be damaged. NOTES- Battery must be removed from bander...

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

Replacement Housing Set for the Orgapack ORT250 & ORT400 battery bander.     NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Orgapack part# 1832.011.198

Replacement Housing set for Fromm P326. If you don't see  your model # please just Email us.This part is geniune OEM

Replacement Left Housing for Fromm P326 & P327. If you don't see your model # please just Email us.This part is geniune OEMAlso available as a set.

Replacement Right Housing for Fromm P326 & P327. If you don't see your model # please just Email us.This part is geniune OEMAlso available as a set.

Replacement Housing set for Fromm P327.  If you don't see  your model # please just Email us. This part is geniune OEM

MUL-330 PART#330-05  Anvil.   There are 3 of these in each tool.     This bander part is OEM

MUL-330 PART#330-02  Side Plate. There are 2 of these in each tool.   This bander part is OEM

MUL-330 PART#330-21  Retaining Ring.   There are 2 of these in each tool.     This bander part is OEM

MUL-330 PART#330-20  Clipring.   There are 4 of these in each tool.     This bander part is OEM

MUL-330 PART#330-07  Slide Plate.   There are 2 of these in each tool.     This bander part is OEM

MUL-330 PART#330-04  Inner Jaw.   There are 6 of these in each tool.     This bander part is OEM

MUL-330 PART#330-03  Outer Jaw.   There are 4 of these in each tool.     This bander part is OEM

MUL-330 PART#330-01  Handle.   There are 2 of these in each tool.     This bander part is OEM

MUL-320 PART#320-52  Retaining Ring.    each tool has 2, sold individually.     This bander part is OEM