Signode

Replacement Toothplate/Gripper Screw for the Orgapack and Signode battery banders. NOTES Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Old Orgapack part# 1832.039.200/ New # 1832...

1821.047.034 Feedwheel for Signode

Replacement LCD Operating Unit for the Orgapack and Signode series of battery powered banders.   This is the panel that controls every function of the tool. Please be sure to take and transfer your protection cover 1832.011.399 when replacing this...

1821.048.027 Gripper For Signode BXT3-16 Battery Powered Hand Tool

Replacement knife/cutter for the Orgapack ORT300 & ORT400 battery bander.Replacement knife/cutter for the Signode BXT-H battery bander.Replacement knife/cutter for the Cyklop CHT300 battery bander.   This is a common wear part...

1832.011.328 Tension Button

Replacement feedwheel for the Signode BXT2-16   This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed.      NOTES- Battery must be removed from bander prior to service. ...

Replacement knife/cutter for the Orgapack ORT 200 & ORT250 battery bander. Replacement knife/cutter for the Signode BXT battery bander. This is a common wear part that, when worn, will not cut the banding completely off . Easy replacement...

1821.151.052 Cable Harness Housing

Li-Ion 18v 4.0Ah replacement battery for the following tools: Orgapack  ORT400 ORT450 Signode  BXT2-19 BXT3-19 Part # 2187.004 Sold elsewhere under: 2187.004 H-2386-BATT 428905

Heavy duty wire cleaning brush with stainless steel bristles Can be used to clean: Feedwheel Grippers Clutch plug Metal housings

1821.209.037 Knife/Cutter for Signode

092772 O-Ring

1821.047.037 Feedwheel Signode

Replacement toothplate for the Signode BXT2-16 NOTES- Battery must be removed from bander prior to service. This is a common wear part, often replaced alongside the feedwheel Install removable thread locker (blue) on screws upon installation

REPLACEMENT OEM 12v BATTERY FOR ORGAPACK/SIGNODE TOOLS For Models: ORT100 ORT200 BXT Voltage:12 Volts Ampere Hours (Ah or Amp Hours):2.4 Chemistry:Nickel-Cadmium (Ni-Cad) Time to charge:1.5 hours / 90 minutes Charger:2179.251 TTR...

Li-Ion 14.4v OEM battery for the following tools: Orgapack  ORT250 Signode  BXT2 VT550L Part # 2187.002 Sold elsewhere under: 2187.002 H-2385-BATT 428866

Replacement knife/cutter for the Signode BXT2-16   This is a common wear part that, when worn, will not cut the excess banding off of your package.     NOTES- Battery must be removed from bander prior to service. Install removable thread...

1821.151.054 Cable Harness Welding Unit

1832.011.346 Side Cover aka FW Cover   Does not work with ORT450 / BXT3-19

1920.108.102 Signode Retaining Ring 8M

Li-Ion 14.4v and 18v replacement battery charger for the following tools: Orgapack ORT400 - ORT250 Signode BXT2-19 - BXT2-16 VT550L Sold elsewhere under: 2188.002 428868

SPRING

CYLINDER HEAD TORX SCREW M4 x

BEARING

CUTTER

1821.151.050 Cable Harness Rocker Lever

Replacement feedwheel for the Signode BXT2-19 Part is stamped with # 1821.047.023 This is a common wear part that, when worn, will not allow the banding to become tight when the button is pressed. PLEASE NOTES: Battery must be removed from bander prior...

1832.041.019 Guide 13mm 1/2

1821.035.011 Bolt

1832.011.329 Actuator

Replacement Intermediate Cable for the Signode BXT2-16 and BXT2-19 battery bander.   NOTES- Battery must be removed from bander prior to service. Install removable thread locker (blue) on screws upon installation Signode part# 428858

BOLT FOR ORGAPACK AND SIGNODE BATTERY STRAPPING TOOLS

1914.840.162 Screw PH PT TORX 40x16

REPLACEMENT 12v - 14.4v BATTERY CHARGER FOR ORGAPACK/SIGNODE/CYKLOP TOOLS For Models: ORT100 ORT200 ORT300 BXT BXT19 CMT200 CHT300 Voltage:12 - 14.4 Volts Ampere Hours (Ah or Amp Hours):N/A Chemistry:Nickel-Cadmium (Ni-Cad)Nickel-Metal Hydride...

CIRCUIT BOARD 1821.152.082

Bolt for Signode BXT2

1920.103.062 Orgapack Retaining Ring

EASY TO USE TORX TOOL FOR REMOVAL AND REPLACEMENT OF GRIPPER/TOOTHPLATE FOR ORGAPACK AND SIGNODE BRAND BATTERY POWERED STRAPPING TOOLS  

.5 ml dropper of 242 strength removable threadlocker. Most tools require the use of a removable threadlocker to secure parts and prevent them from moving due to vibration.