Description
REGULAR DUTY PUSHER BAR TENSIONER
The MIP-1800 is a regular duty, pusher bar tensioner for round or irregular surfaces. With an extremely small footprint, this tool is perfect for jobs where there isn't much work area, like hanging HVAC or Air Ducts. Commonly referred to as the "Insulation tool" or "Insulators tool." Uses a gripper to hold the banding tight while the body rides the pusher bar to achieve tension.
Looking for replacement parts? Click Here
Strapping Dimension:
W: 3/8" - 3/4" (10mm to 19mm)
G: .015" to .023" (3.8mm to .58mm)
Weight:
4 lbs
Tension:
Limited tension capabilty, tool must be reracked to achieve higher tension. However, you cannot wear parts out by overtensioning like the a feedwheel tool
Speed:
N/A
Average seal strength:
Dependant on seal/sealer used
Strapping Dimension:
W: 3/8" - 3/4" (10mm to 19mm)
G: .015" to .023" (3.8mm to .58mm)
Weight:
4 lbs
Tension:
Limited tension capabilty, tool must be reracked to achieve higher tension. However, you cannot wear parts out by overtensioning like the a feedwheel tool
Speed:
N/A
Average seal strength:
Dependant on seal/sealer used
Seal and Joint type:
Pusher
Single Notch
Similar Tools:
Gerrard 1902-D
Acme B2A0
Datasheets & Literature
Replacement Parts
- MIP M1800-10 Holding Dog Spring
- MIP M1800-8 Holding Dog
- MIP M1800-11 Holding Pawl Spring
- MIP M1800-5 Pop Rivet
- MIP M1800-9 Holding Dog Shaft
- MIP M1800-4 Ratchet Wheel
- MIP M1800-14 Pulling Pawl
- MIP M1800-16 Tension Lever
- MIP M1800-20 Set Screw
- MIP M1800-13 Release Handle
- MIP M1800-3 Pusher Bar
- MIP M1800-6 Holding Pawl
- MIP M1800-12 Release Shaft
- MIP M1800-22 Cotter Pin
- MIP M1800-7 Holding Pawl Shaft
- MIP M1800-17 Dowel Pin
- MIP M1800-19 Lock Washer
- MIP M1800-18 Machine Screw
- MIP M1800-15 Tension Lever Shaft
- MIP MIP-1800 Pusher Bar Tensioner Hardware Kit
Additional Information
Type: |
Tensioner |
Features: |
Complete Tool |
Operation: |
Manual |
For Use With: |
Steel |
Strap Size: |
1/2" |
Strap Size: |
5/8" |
Strap Size: |
3/4" |