YBICO

Sealer for 3/8" or 5/8" open type seals. This double notch action tool is economical and satisfies all general applications requirements for steel strapping. All wearing steel parts are heat-treated...

General application light duty cutter for 1/2" - 5/8" steel or poly banding

REGULAR DUTY POLY TENSIONERThe ORS1100.19-E is a regular duty poly banding tensioner. It can be used in 3/8" to 3/4" applications, both polyester, and polypropylene. This tool is for flat surface...

LIGHT DUTY THROW-AWAY POLY TENSIONERThe ORS1100.19-G is a light duty poly banding tensioner. It can be used in 3/8" to 5/8" applications, both polyester, and polypropylene. This tool is for flat...

PF-G is a pusher tensioner for steel strapping. Use with closed seals. 3/8" - 3/4" x up to 0.025in.

Feedwheel

CLUTCH PLUG

 S296 Feedwheel/Tension wheel.   This part pulls the banding tight and works with the gripper  to achieve tension on the banding. It is common for this part to wear out causing...

This part pulls the banding tight and works with the gripper to achieve tension on the banding. It is common for this part to wear out causing it to slip when tensioning the band. If the wheel just...

This part holds the banding on the lower side of the tensioner. If the banding is "pulling through" the tensioner,  it is likely that this part needs replaced. It is a common wear...

Pawl Spring for Ybico S298 manual tensioners. Please note: This part is sold individually but each tool contains 2 of these springs, and generally need replaced together.      

Replacement Feedwheel handle for the Ybico SL-340 sealless banding tool

Replacement Feedwheel for the Ybico SL-340 sealless banding tool

Replacement gripper for the Ybico SL-340 sealless banding tool

COMPACT LIGHT DUTY STEEL TENSIONER FOR FLAT SURFACEThe ST-G is a light duty steel banding tensioner. It can be used in 3/8" to 3/4" applications but we suggest using using it light tension...

COMPACT LIGHT DUTY STEEL TENSIONER FOR FLAT SURFACEThe T-G is a light duty steel banding tensioner. It can be used in 3/8" to 3/4" applications but we suggest using using it light tension applictions...

ECONOMY HEAVY DUTY STEEL TENSIONER FOR FLAT SURFACEThe TH-G is a heavy duty steel banding tensioner. It can be used in 3/4" to 1 1/4" applications. This tool is for flat surface usage and requires...